My Basket:
0 item(s) - £0.00
You have no items in your shopping Basket.

More Views

Elan Warm Air Hand Dryer

Quick Overview

  • Elan Warm Air Hand Dryer
  • Contemporary Styling
  • Vandal Resistant
Price:  
Excl. Vat: £226.28 Incl. Vat: £271.54

Availability: In stock

Delivery Time:   1-2 Days

Warranty:   5 Years

Quick Code:   11110

Price Match Image

 

Elan Warm Air | Brushed Satin | Vandal Resistant

 

MATERIALS:

Cover — One-piece, deep drawn, 20-gauge (0.9mm), type-304 stainless steel with satin finish. Cover is secured to mounting base with three fl at-head stainless steel screws.

Mounting Base and Fan Housing — 5/64" (2mm) thick fire-retardant molded grey plastic with high-gloss finnish. Plastic air-inlet grille fits into bottom of mounting base. Plastic air-outlet grille is secured between fan housing and mounting base.

Motor — Maintenance-free capacitor run, external rotor motor with sealed ball bearings at both ends of drive shaft. Equipped with an automatic thermal-overload switch.

Fan — Dynamically balanced 5-15/64" (133mm) diameter rotor centrifugal fan with multiple metallic vanes. Directs air flow from heating element at 100 cfm, mixes air to provide uniform temperature.

Heating Element — Coiled nickel-chrome heating element is protected by an automatic thermal-overload switch and thermal fuse. Heating element, which is located on inlet side of fan, heats air without hot spots — inaccessible to vandals.

Electronic Control — Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately two minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across sensor lens. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally

 

OPERATION:

No-touch operation. Electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Dryer will not stop by itself before user is satisfied hands are dry. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off two minutes after dryer turns on if an inanimate object is placed across sensor lens. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.

5-Year Limited Warranty — This warranty is limited to the repair or exchange of defective parts at the option of Bobrick. See Installation Instruction Sheet,

INSTALLATION:

Wall Preparation: Secure mounting base on wall using template provided. For masonry walls, provide four #10 expansion shields or anchors and secure with four #10 (M4.8) sheet-metal screws (not furnished). For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with four #10 (M4.8) round-head sheet-metal screws or 3/16" (5mm) toggle bolts (not furnished). Provide electrical service from nearest distribution panel to dryer mounting base in compliance with local electrical codes

WIRING INSTRUCTIONS:

Live wire to terminal marked L1, and neutral wire to terminal marked N. Notes: Electronic sensor in Elan Dryer will pick up movement within 4" (100mm) of air-outlet nozzle. Use caution when choosing location for Elan Dryer in confined areas. Consider proximity to doorways and other traffic areas. Bobrick automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor. For installation instructions that include step-by-step installation procedures and details of electrical service connections, see Form No. 715-69, which is packed with each shipment. This form is also available in advance upon request.

SPECIFICATION:

Surface-mounted hand dryer shall have a deep-drawn, 20-gauge (0.9mm) thick, stainless steel cover with satin fi nish. Mounting base and fan housing shall be fi re-retardant molded grey plastic. Capacitor run, external rotor motor shall be 90 watts, sealed with ball bearings on ends of drive shaft, and be equipped with a thermal overload switch. Centrifugal fan shall have multiple metallic vanes. Heating element shall be located on inlet side of fan, shall heat without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch and thermal fuse. Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor. Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately two minutes after dryer turns on if an inanimate object is placed across sensor lens. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. Unit shall be VDE approved, CE marked. Unit shall comply with EU Directive “Restriction of Hazardous Substance” (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products. Unit shall be protected by a limited 5-year warranty on all parts.

Product Code Colour Height (mm) Width (mm) Depth (mm)
 B-715E Brushed Satin  280 295 140

  

INSTALLATION HEIGHTS

Installation Heights are from the floor to bottom of dryer
Men 1170mm
Women 1120mm
Children aged 4 - 7 810mm
Children aged 7 - 10 910mm
Children aged 10 - 13 1020mm
Children aged 13 - 17 1120mm
Disabled Users 940mm
Download Attachment
pdfTechnical Data Sheet(60.48 KB )Download
pdfInstallation Instructions(454.39 KB )Download

Write Your Own Review

Only registered users can write reviews. Please, log in or register

 

© 2015 CGS Stores LTD. ALL RIGHTS RESERVED.