Zip Instantaneous Water Heater 2.8kW
Original Price £436.16 Special Price £305.32 £254.43
Availability: In stock
Quick Code :
12218
Warranty :
1 Year
Brand :
Zip
Delivery :
1-2 Days
Sku :
ES3
Description
The ES is designed to provide hot water for handwash in areas where space is limited
Heating power controlled electronically for temperature stabilisation
Outlet temperature can be preset inside the unit between 30˚C and 45˚C (factory set at 38˚C)
Flow adjustment control, preset for a temperature increase of 25k
Stainless steel bare-wire heating system for very quick response
Double pole thermal cut-out protection
Supplied with 700mm of pre-wired cable
Easy to install with improved wall bracket
WRAS approval and CE endorsed
| Product Code | ES3 | ES4 | ES6 |
| Pressure rating | 10 Bar | ||
| Element type | Bare Wire | ||
| Supply voltage | 1/N/PE 230V~ | ||
| Nominal power rating @ 230V | 2.8kW | 4.4kW | 5.5kW |
| Nominal current @ 230V | 12A | 19A | 24A |
| Temperature adjustment (installer) | 30°C - 45°C | ||
| Maximum inlet temperature | 70°C | ||
| Factory set temperature | 38°C | ||
| Factory set flow rate 38°C | 1.5 litres/min | 2.4 litres/min | 3.0 litres/min |
| Maximum temperature increase @ 230V and a flow rate of: | |||
| 2.0 litres/min | 20°C | 31°C | 39°C |
| 2.5 litres/min | 16°C | 25°C | 31°C |
| 3.0 litres/min | 13°C | 21°C | 26°C |
| 3.5 litres/min | 11°C | 18°C | 22°C |
| 4.0 litres/min | 10°C | 16°C | 20°C |
| Switch on flow rate | 1.2 litres/min | 1.5 litres/min | 1.5 litres/min |
| Switch off flow rate | 1.0 litres/min | 1.3 litres/min | 1.3 litres/min |
| Required specific water resistance @ 15°C | >1100 ohm.cm | >800 ohm.cm | >800 ohm.cm |
| Capacity | 0.2 litres | ||
| Filled weight | 1.5kg | ||
| Water connection | 1/2”BSP | ||
| Dimensions (H x W x D) | 135mm x 186mm x 87mm | ||
| Protection class (IEC 529) | IP25 | ||