Application
This pressure-tested mini instantaneous water heater supplies DHW to one washbasin.
Operation is possible with pressure taps or non-pressurised taps.
Convenience features
The mini instantaneous water heater with flow switch and automatic flow rate control delivers near constant preferred temperatures up to the maximum output.
The heating output is hydraulically controlled in one single stage, subject to flow rate.
For the preferred temperature, cold water is mixed in at the tap.
Including special aerator for perfect water flow pattern and integral flow controller for fitting in existing taps.
Undersink installation.
Efficiency
Mini instantaneous water heaters heat the water directly at the draw-off point and only when required. Energy and water losses due to long pipe runs are prevented, resulting in high energy efficiency.
Installation
Secured at 2 points; the back panel also serves as a drilling template; slots enable compensation for drill hole discrepancies.
The appliance cover and internal assembly can be removed with just one hand movement.
External metal water connections are available for quick and universal water connection. Taps can be installed directly. The prepared power cable makes the mains connection easy.
Safety
The maintenance-free bare wire heating system is suitable for hard and soft water.
The safety system is equipped with a safety pressure limiter.
Model | SKU | Height (mm) | Width (mm) | Depth (mm) | IP Rating | Colour |
DHM 4 Set | 236451 | 143 | 190 | 82 | IP25 | White |