Chrome finish unit is equipped with single outlet for efficient dry time. The unit is uniquely designed to have a sound pressure level of 72dB(A) measured at 39" (1 meter) from source. The unit is CE marked, cULus Listed..
Bobrick DuraDry Hand Dryers:
No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Dryer will not stop by itself before user is satisfied hands are dry. Dryer operates only when actually drying hands which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
10-Year Limited Warranty — In addition to Bobrick’s one-year guarantee, Bobrick extends a limited 10 year warranty from the date of purchase for Model B-770 and B-778 hand dryers on all parts, except motor brushes, to the original owner of the installed unit against defects in factory workmanship or material under normal use and service. Motor brushes are warranted for 3 years from date of purchase. This warranty is limited to the repair or exchange of defective parts at the option of Bobrick.
Cover — Aluminum die-casting with white high-gloss epoxy finish electrostatically applied (B-770) or chrome finish (B-778). Air-inlet opening is equipped with vandal-resistant grill. Cover is secured to mounting base with two concealed, recessed hexscrews.
Air-Inlet Grill – One-piece vandal resistant aluminium die-casting, with black high gloss epoxy finish electrostatically applied.
Mounting Base — Equipped with four 0.236" (6mm) diameter mounting holes and one 7/8" (22mm) diameter hole suitable for between-wall wiring.
Motor/Fan — Thermally-protected, Universal, 1/10 hp, 7000 rpm motor construction with shielded ball-bearings. Single-inlet forward-curve impeller, providing air volume of 112m3 /Hr (66 cfm); air velocity of 46 m/s (9000 lfm).
Heating Element — Coiled Nichrome heating element mounted on a mica frame, protected by integral automatic thermal overload device. To heat air without hot spots and remain inaccessible to vandals.
Electronic Control — Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
|Product Code||Colour||Height (mm)||Width (mm)||Projection/Depth (mm)|
|B-778 230V||Polished Chrome||307||267||188|
|Installation Heights are from the floor to bottom of dryer|
|Children aged 4 - 7||810mm|
|Children aged 7 - 10||910mm|
|Children aged 10 - 13||1020mm|
|Children aged 13 - 17||1120mm|
Q. Is the warranty an on-site Warranty?
A. No, if your hand dryer becomes faulty during the warranty period it will need to be returned to the manufacturer for either a repair or replacement. The warranty on any product is offered by the manufacturer and not by ourselves however we will assist with any problems that may occur during this period."