The Dyson Airblade Tap AB11 is a panel mounted version tap that enables the user to wash their hands + dry them without moving away from the basin area. It frees up your washroom as alternative hand dryers take up floor and wall space that could be utilized with an additional toilet cubicle. It boasts the same airblade technology and the Dyson Airblade AB14 and AB08.
Manufacturer states a dry time of 12 seconds
The air force generated by the 90,000 rpm motor is quite simply outstanding, placing the device alongside the elite of ‘hands in’ style blade dryers from a fast hand drying perspective. Of course, it is necessary to turn the hands over in this case, however, owing to the sheer power of the dryer, this only makes a marginal difference.
Noise :
Manufacturer stated 85 dbA
Due to the sheer power of the motor, the official decibel level of 85dbA is at least twice as loud as some other high speed hand dryers, and can be as much as eight times louder.
Recommended for High usage washrooms with over 300 uses per day
Dyson Airblade AB11 uses 4.40 watts per dry
It is not the most energy efficient hand dryer, ranking outside the top 10 dryers in this regard. The Dyson Airblade Tap has a documented carbon footprint and is on the enhanced capital allowance scheme for eco, high speed hand dryers.
The Water flow rate is 4 litres/min and it is recommended that a thermostatic mixer is used (not supplied)
Hygiene :
Due to the design of the model it is of course non-touch and comes with a HEPA filter and boasts anti-bacterial surfaces. With 430mph sheets of air that scrape the water from the hands it ensures your hands are dried guickly and hygienically.
With a 5 year guarantee, the Dyson Airblade ™ Tap is built to last.
Please see installation requirements in our download section
If you are looking for a hand dryer that takes up no additional space and delivers fast drying then the Dyson Airblade Tap is the perfect solution.
Summary AB11 Wash + Dry Hand Dryer by Dyson
TECHNICAL SPECIFICATION
Operating Voltage | 220-243Vac, 50 Hz |
Rating Power | 1600W |
Motor Type | Dyson Digital motor - brushless DC Motor |
Motor speed | 90,000rpm |
Heater Type | None |
Stanby Power Consumption | Less than 0.5W |
Filter | HEPA |
Drying Time | Under 14 Seconds |
Operation | Touch Free Infrared activation |
Water Protection | IP35 |
Isolation | Class I |
Net weight | 4.3kg |
Unit Size | W 297 x H 95.4 x D 312mm |
Finish | Stainless Steel - Brushed |
Decibel Rating | 85 dbA @ 2 mtr |
Approvals | |
Water Flow Rate | 4L/min |
Water Temperature Control | Thermostatic mixer recommended (not supplied) |
Water Pressure Required | 1-8 Bar |
Warranty | 5 Year |
Product Code OLD | AB11 |
Product Code NEW | WD06 |